Image 1 of 10
Image 2 of 10
Image 3 of 10
Image 4 of 10
Image 5 of 10
Image 6 of 10
Image 7 of 10
Image 8 of 10
Image 9 of 10
Image 10 of 10
Correct Connect 3-in-1 Training Breastplate
Correct Connects 3-in-1 Training Breastplate has helped many riders worldwide of all levels and backgrounds. From learning to balance while posting the trot to helping riders establish a correct and direct connection to the horse's mouth. This training aid helps riders and horses fix MANY issues with just one piece of equipment!
The T-Grips attached to the breastplate limit the amount the rider can pull back while connecting the hands in a straight line from the bit to the elbow. This encourages a softer elbow and a more relaxed connection. Horses tend to be more uphill in a more correct carriage when ridden in this aid.
This 3-in-1 Training Breastplate does not rely on leverage and is not a shortcut. It does not force a horse's head into a locked position but instead helps the RIDER find the correct forward feeling of riding a horse into the contact.
How To Size:
Using a measuring tape, measure from D-Ring to D-Ring around the horse's chest. Measurements can be a little loose as you do not want the breastplate too tight and the T-Grips should not be too low.
Pony: 40"-49" or 102cm-124.5cm
Full: 49"-62" or 102cm-158cm
Extra Full: 58"-66"or 147cm-168cm
Fitting Instructions
1. The collar should fit softly around the base of the neck and attach to the D-Rings of the saddle.
2. Toggles can attach to one of two rings on the collar based on horse size.
3. To help the horse seek the contact, gently lift up against the horse's neck.
4. Most riders prefer to hold the toggle between their middle and ring finger with their reins held normally between the ring and little finger.
Correct Connects 3-in-1 Training Breastplate has helped many riders worldwide of all levels and backgrounds. From learning to balance while posting the trot to helping riders establish a correct and direct connection to the horse's mouth. This training aid helps riders and horses fix MANY issues with just one piece of equipment!
The T-Grips attached to the breastplate limit the amount the rider can pull back while connecting the hands in a straight line from the bit to the elbow. This encourages a softer elbow and a more relaxed connection. Horses tend to be more uphill in a more correct carriage when ridden in this aid.
This 3-in-1 Training Breastplate does not rely on leverage and is not a shortcut. It does not force a horse's head into a locked position but instead helps the RIDER find the correct forward feeling of riding a horse into the contact.
How To Size:
Using a measuring tape, measure from D-Ring to D-Ring around the horse's chest. Measurements can be a little loose as you do not want the breastplate too tight and the T-Grips should not be too low.
Pony: 40"-49" or 102cm-124.5cm
Full: 49"-62" or 102cm-158cm
Extra Full: 58"-66"or 147cm-168cm
Fitting Instructions
1. The collar should fit softly around the base of the neck and attach to the D-Rings of the saddle.
2. Toggles can attach to one of two rings on the collar based on horse size.
3. To help the horse seek the contact, gently lift up against the horse's neck.
4. Most riders prefer to hold the toggle between their middle and ring finger with their reins held normally between the ring and little finger.